HOME      FEEDBACK      CONTACT

Hello, welcome to Jiangsu ShenLiDe Intelligent Equipment Co.,LTD.

0523-88299168 

Address: No.508 Science and Technology Road, Jiangyan Economic Development Zone, Taizhou City, Jiangsu Province

HOME                  ABOUT            PRODUCT            
NEWS                   HONOR          PICTURE              
TECHNOLOGY      RECRUIT      CONTACT

Telephone:0523-88299168
Mobile phone:13905268245(Mr. Hua)

© Jiangsu ShenLiDe Intelligent Equipment Co., LTD.
苏ICP备17076506号-1    Powered by:300.cn

E-mail:409251712@qq.com

Woodworking engraving machine and laser engraving machine Woodworking Which is more professional?

[Abstract]:
Who said wooden material must use carpentry engraving machine, laser engraving machine is not the same? If you are good with a laser engraving machine can be carved as wood.

   Who said wooden material must use carpentry engraving machine, laser engraving machine is not the same? If you are good with a laser engraving machine can be carved as wood.
    
Laser engraving machine engraving features:
Engraving on plywood is not much different from carving on wood, except that there is a point to note that the engraving depth can not be too deep. The cut edge of the plywood will also be as black as wood, the key is to see plywood is made of that kind of wood.
Wood is by far the most commonly used laser processing material and is easy to engrave and cut. Light-colored wood like birch, cherry or maple is easily vaporized by the laser, making it more suitable for engraving. Each kind of timber signage has its own characteristics, some dense, such as hardwood, engraving or cutting, we must use more laser power. We recommend carving wood is not familiar before, we must first study the engraving characteristics.
     
Wood engraving laser engraving machine and mechanical carving engraving machine difference:
In general, engraving on wood is usually overcast, and the depth of engraving generally requires deeper. This power is generally set higher, such as hard wood may cause the carved graphics color becomes darker. If you want to make the color lighter, can increase the engraving speed, try to carve several times. Some wood in the carving will produce some smoke attached to the surface of the wood, if the wood has been painted with a damp cloth to wipe it carefully, if not painted may not clean, resulting in finished surface defaced.
The laser engraving machine cutting wood depth is generally not deep, the maximum cutting depth depends on the wood material and laser power, such as cutting thick wood, can slow down the cutting speed, but may cause the burning of wood. Specific operations can try to use large size lenses, and the use of repeated cutting method.

NEWS