Tenon machine

I. Technical parameters 

Working conditions and technical indicators

Suction inlet

100mm

Intake pressure  

0.5-0.8MPa

Pressure loss ≤ 5% of working pressure

Bed dimension  

1250mmX400mm

Voltage  

380V

Tenon cutter shaft diameter

30mm

Mortise chuck type  

ER25mm

Caliber of air adapter tube 

10mm

Net weight of equipment

2000KG

Parameters 

Straight tenon processing workpiece  width * thickness

120mmX120mm

Male and female tenon processing workpiece width * thickness  

100mmX120mm

Chad tenon processing workpiece width * thickness 

85mmX75mm

Shoulder tenon processing workpiece width * thickness  

100mmX100mm

Dieboard tenon processing workpiece width * thickness  

100mmX90mm

Brown angle tenon processing workpiece width * thickness

75mmX75mm

Floating shoulder tenon processing workpiece width * thickness

80mmX80mm

Tiger feet tenon wide * thickness  

110mmX110mm 

Mortise depth  

10mm-75mm

Total power

9.2KW

Tenon knife speed

12000r / min

Mortise speed

18000r / min

Mortise cutter diameter  

5-16mm  

II. Performance characteristics:

1. Process: 45 ° mortise joint (single and double), timber splicing can be carried out at any angle (within 30 ° -60 °), brown angle tenon, chad tenon, inserted shoulder tenon (sword tenon, single inserted and double inserted tenons, hole sweeping or non-sweeping. It can be adjusted on equipments according to the customer’s demands), tiger angle mortise (the thickness of the current processing ** is 120mm), dieboard tenons and so on. 

2. Convenient: The position and size of tenons and mortises should be set on the man-machine interface and N production programs can be stored. It contains the angle calculation formula, to facilitate the splicing and processing of varying sizes of woods. 

3. Applications: classical mahogany furniture, new Chinese furniture.

4. If the process is more complex, it is required to adjust the current process of the equipment and produce customized equipments.            

III. Main suppliers of parts     

Servo motor: Taiwan Delta

Inverter: Taiwan Delta  

System: Taiwan Delta 

Slider: HIWIN silver coating   

Lead screw: TBI

Guide rail: HIWIN silver coating  

IV. System 

Dust-proof system: Mount a positive pressure blower in the main machine gearbox

Lubrication system: Oil supply according to the frequency of workpieces processing   

Bed dimension: 1200mm * 460mm;